References
Goto, Y., Wang, Q.Y. and Obata, M. (1998). “FEM analysis for hysteretic behavior of thin-walled columns”, J. Struct. Eng., 10.1061/(ASCE)0733-9445(1998)124:11(1290), 1290-1301.
Goto,Y, Jiang, K., and Obata, M.(2006). “Stability and ductility of thin-walled circular steel columns under cyclic bidirectional loading”, J. Struct. Eng., 10.1061/(ASCE)0733-9445(2006)132:10(1621), 1621–1631.
Obata, M. and Goto, Y. (2007). “Development of multidirectional structural testing system applicable to pseudodynamic test”, J. Struct. Eng., 10.1061/(ASCE)0733-9445(2007)133:5(638), 628-645.
Goto,Y, Muraki,K. and Obata, M.(2009). “Ultimate state of thin-walled circular steel columns under bidirectional seismic accelerations”, J. Struct. Eng., 10.1061/(ASCE)ST.1943-541X.0000076, 1481-1490.
Goto, Y., Ghosh, P. K., and Kawanish, N. (2010). “Nonlinear finite element analysis for hysteretic behavior of thin-walled circular steel columnswith in-filled concrete.” J. Struct. Eng., 10.1061/(ASCE)ST.1943-541X.0000240, 1413–1422.
Goto, Y., Mizuno, K., and Ghosh, P. K. (2012). “Nonlinear finite element analysis for cyclic behavior of thin-walled stiffened rectangular steel columns with in-filled concrete.” J. Struct. Eng., 10.1061/(ASCE)ST.1943-541X.0000504, 571–584.
Goto, Y., Ebisawa, T., and Lu, X.(2013). “Local Buckling Restraining Behavior of Thin-Walled Circular CFT Columns under Seismic Loads”, J.Struct. Eng., doi: 10.1061/(ASCE)ST.1943-541X.0000904, 04013105.
Goto, Y. (2014). ”Chapter 10 Seismic design of thin-walled steel and CFT piers”, Bridge Engineering Handbook, Seismic Design, edited by Wai-Fah. Chen & Lian Duan, 2nd edition, CRC press, pp.337-380, ISBN 978-1-4398-5218-7.
Goto, Y. , Ebisawa, T., Lu, X., and Lu, W. (2014). “Ultimate State of Thin-Walled Circular Steel Columns Subjected to Biaxial Horizontal Forces and Biaxial Bending Moments Caused by Bidirectional Seismic Accelerations“, J. Struct. Eng., 10.1061/(ASCE)ST.1943-541X.0001067, 04014122.
Goto, Y., Ebisawa, T., Okumura, T., Matsuzawa, A. and Obata, M. (2014), ”水平２方向加振を受ける連続高架橋模型における橋脚，ゴム支承，上部構造の連成とその終局挙動について”，Proc. of the 17th Symposium on Performance-based Seismic Design Method for Bridges, JSCE, 431-438 (in Japanese).
Okumura, T., Goto, Y., Ebisawa, T., Obata, M., Li, J. and Xu, Y. (2015), ”鋼製橋脚で支持された連続高架橋における積層ゴム支承の水平2方向地震動下の挙動特性”，Proc. of the 18th Symposium on Performance-based Seismic Design Method for Bridges, JSCE, 49-56 (in Japanese).
Ebisawa, T., Goto, Y., Obata, M., Li, J. and Xu, Y. (2015), ”円形断面鋼製橋脚を持つ連続高架橋の2方向加振実験のFE解析と終局挙動特性”，Proc. of the 18th Symposium on Performance-based Seismic Design Method for Bridges, JSCE, 57-64 (in Japanese).